Product Description EGE-25 plastic clad metal consists of a steel tape coated on both sides with an adherent ethylene copolymer. The copolymer exhibits excellent adhesion to the steel substrate and has the chemical resistance and general characteristics of lower density polyethylene, it bonds to low, linear low, medium and high density polyethylene. The steel is low carbon, electronic chrome-coated steel tempered to T-2 condition for excellent formability and fabrication characteristics.   Specification   Type Standard Thickness Color EGE-25 YD/T723.3-94 Steel EAA Total White, Green   0.155±0.005 0.05±0.005 0.255±0.01   Property Unit Typical value Test method Tensile Strength MPa 300 ASTM E8 Elongation at break % 15 ASTM E8 Peel strength N/cm 6.13 ASTM B 736 Heat seal strength N/cm 17.5 ASTM B736 Filler/Floodant Resistance 68±1°C,168hrs   No delamination REA PE-39, PE-89 Water Resistance 68±1°C,168hrs Peel strength N/cm 6.13   ASTM B736 Dielectric Strength Two-side, DC 2KV, 1 min     No break Corrosion Resistance Grade 7