Welcome to Wuxi Suda New Material Technology Co., Ltd. official website!

Hot Phone: +86-510-85186(1)198

Current position:

Index > Product > Copolymer Coated > Copolymer Coated Aluminum

Product List

Copolymer Coated Aluminum

Product Description

Copolymer coated steel tape consists of steel tape coated on one side or both sides with an adherent ethylene copolymer. The copolymer exhibits excellent adhesion to the steel substrate and has the chemical resistance and general characteristics of lower density poly-ethylene. It bonds to low, LLDPE, MDPE and HEPE. The steel is low carbon electronic chrome-coated steel tempered to T-2 condition for excellent formability and fabrication characteristics.

Technical Data Sheet

Property Unit Values Method

Natural or Green

Thickness Steel 0.15 / 0.20 mm  
EAA 0.05 mm  
Tensile Strength MPa ≥300 ASTM E8
Elongation % ≥15 ASTM E8
Peel strength N/cm ≥6.13 ASTM B736
Heat Seal strength N/cm ≥17.5 ASTM B736
Corrosion resistance Grade 7 -------

Filler / Flood Resistance 68 deg C/168 hrs

------- No Delamination PEA PE-39, PE-89
Water Resistance 68 deg C/168 hrs, Peel Strength 68℃ N/cm ≥6.13 ASTM B736
Dielectric Strength Two-Side, DC 1Kv, 1min ------- No Break -------


Inner Diameter


Outer Diameter

Roll core material




paper/steel/plastic cire


Keep the warehouse clean. Avoid exposure to direct sunlight, pollution and all damage cuased by external forces.


Skilled operators should take or lay the materials gently, avoid scrap and crash problems.


The above mentioned data sheet should, however, only be regarded as a general guide to product properties and not as a guarantee. Some of the properties can be changed as a result of our efforts to improve the quality of our products. All listed test method is just for reference, actual test performed according to modified equipment and conditions.

Copyright © 2016 Wuxi Suda New Material Technology Co., Ltd. All rights Reserved Copyright may not be used without permission, reproduced excerpts. Su ICP 05008124